DMG CTX beta 500 Linear V4 (used)

2-axis
The maximum turning length of 500 mm
Main spindle: an integrated spindle motor ISM 76.
- The main drive: AC, 25/34 kW (100/40% ED), the number of revolutions of 5000 min-¹
- Closed jig (hydr.)
  protracted tube inner diameter of 67 mm Ø
- C axis with spindle brake (hydr.)
- Linear motor along the X axis
- 12-position turret head f. Sauter
 for power tools
tailstock
The Y-axis slide on the Crusades
± 60 mm stroke
Internal adjustable stop in the hollow spindle, mounted on the rear side of the clamping cylinder Ø67
(Regardless of cartridge)
Clamping pressure differential
for the main spindle
Device removal of coolant vapor
mechanical filter Performance 600 cubic meters. m / hour
H13 filter class
Feeder coolant, consisting of: - coolant tank 600 liters;
- 8 bar / 20 l / min and 20 bar / 40 l / min
using programmable M-functions with coolant through the disc
turret for vsehpozitsy;
- Belt filter, filter quality of 40 microns;
- Control of the coolant level.
Gun coolant for chip removal
Package for bar machining
consisting of: - catcher finished parts to size Ø 65 x 200 mm, weight 6 kg
  a conveyor belt for removal of left parts
- Open the hydraulic clamping device clamping force of 68 kN at P max 45 bar; max inner diameter of pipe 67 mm protracted.
- 4-color signal lamp
- Interface to supply rod or bar supply store device (. Note: Gildemeister Company approved the use of bar feeding device following companies Breuning - IRCO, LNS)
Motorized three-jaw chuck with through-hole,
 type KFD-HS 250-91, company Röhm, including connecting elements
Connector / lighting electrical cabinet, 230
Security Package with a power failure,
protection consisting of a voltage drop
Engine (s) podachoseyZ / stormozil (s
Package for tropical climate for ambient temperature of max. 40ºC,
consisting of cooling system for control cabinet (until 40ºC)