Product Description
ID #: 387270 Brand: DECKEL MAHO Model: DMG-DMU80P Type: Vertical Machining Centers (5-Axis or More) Condition: Good Year: 1999 Control: CNC (Millplus) Seller: Show me who the seller is... Location: Germantown, Wisconsin United States Return Policy: as-is Stock #: 063971 Price: Request a QuoteAdded to Request list X: 31.5 " Y: 27.6 " Z: 23.6 " # Axis: 5 Power: 20 hp RPM: 18000 rpm # ATC: 60 Taper: CAT 40 Control: CNC (Millplus) SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: One used 1999 DMG DECKEL MAHO DMU80P 5-Axis Universal Machining Center: Machine made in Pfronten, Germany Heidenhain Millplus CNC Control -DESIGN CONCEPT- This is a UNIVERSAL machining center meaning it is two machines in one: both a vertical AND horizontal machining center. The universal milling head on this machine is automatic and programmable. It can be swivelled in 5 seconds from vertical to horizontal, and in combination with the rotary swivel table makes 5-sided 5-axis machining in a single set up possible. Setup time is reduced, the need for multiple setups is eliminated and accuracy and precision are improved. The P Series machines are intended for fully automatic manufacturing of highly complex workpieces in a single set up. Ideal for both small and large batches with the high production components including high pressure CTS (Coolant Thru The Spindle) and chip conveyor. -WORKING RANGE- X axis (longitudinal)................................... 31.5" (800 mm) Y axis (transverse)..................................... 27.6" (700 mm) Z axis (vertical)....................................... 23.6" (600 mm) -NC SWIVEL ROTARY TABLE- Clamping surface............................... 24.8" diameter (630 mm) Maximum table load.................................. 1,320 lbs (600 kg) Rapid speed rotary axis........................................ 9.3 rpm Rapid speed swivel axis........................................ 7.3 rpm Rotation range...................... 360 x 0.001 degree (Full 4th axis) Swivel angles To spindle -45 degrees, from working spindle +30 degrees -AUTOMATIC UNIVERSAL MILLING HEAD- Automatic swivel from horizontal to vertical in approximately 5 seconds. The auto swivel head makes this machine 2 machines in one because both vertical and horizontal machining is possible with one workpiece clamping. Together with the NC Swivel Rotary table 5-Sided, 5-Axis machining is possible with one workpiece clamping. -MAIN DRIVE- Type............................................. AC controlled/digital Power 40% duty cycle (S3)................................ 20 hp (15 kW) Power 100% duty cycle (S1)............................. 13.5 hp (10 kW) Spindle speed range...................................... 20-18,000 rpm Number of gear steps.............................................. None Maximum spindle torque.............................. 95 ft/lbs (121 Nm) Spindle bearing diameter front........................... 3.15" (80 mm) Spindle taper.................................................... CAT40 Clamping force............................................... 2,250 lbs -FEED DRIVES- Type.............................................. Brushless AC/Digital Feed rate (x-y-z)....................... 0.04-590 ipm (1-15,000 mm/min) Rapid feed (x-y-z)................................ 79 ft/min (24 m/min) Feed power (x-y-z)........................................... 2,250 lbs Anti-collision clutch................................................ z Ballscrew thread x/y/z.............. 1.6 x 0.5/1.6 x 0.5/1.6 x 0.5 inch -60 POSITION TOOL CHANGER- Magazine type........................ Chain, horizontal, double gripper Number of pockets................................................... 60 Maximum tool weight..................................... 22 lbs (10 kg) Maximum tool diameter with no neighbouring empty pockets... 4" (102 mm) Maximum tool diameter with neighbouring empty pockets.... 6.3" (160 mm) Maximum tool length..................................... 13.8" (350 mm) Tool change time............................. Approximately 7.5 seconds Chip-to-chip time CAT40 Approximately 7.5 seconds vertical, 12.5 sec horiz -HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM- Input Resolution.............................................. 0.001 mm -HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM- Input Resolution.............................................. 0.001 mm -EXTERNAL FLOOD COOLANT PUMP ON OUTSIDE OF SPINDLE- Pump output external jets flow rate....... 5.3 gallon/minute (20 l/min) Coolant tank capacity................................ 50 gallon (189 l) -INTERNAL COOLANT SUPPLY THRU THE SPINDLE- Coolant tank capacity............................... 160 gallon (606 l) Pump output thru the spindle................ 6 gallon/minute (23 l/min) Coolant pressure...................................... 580 PSI (40 bar) -EQUIPPED WITH- Fully enclosed protection cabin Renishaw MP10 infrared parts measuring probe Chip conveyor Rotoclear inspection window on operator window -DIMENSIONS AND WEIGHT OF MACHINE- Transport dimensions, approximately......... 10'9" L X 10'4" W X 8'2" H Transport weight, approximately.................. 21,504 lbs (9,754 kg)
